Перейти к содержанию

title: [NMEA] GPS app for Flipper Zero by @ezod & @xMasterX description: Works with GPS modules via UART, using NMEA protocol. tags: - gpio


  • [NMEA] GPS logo [NMEA] GPS for GPIO GPIO


    Works with GPS modules via UART, using NMEA protocol.

  • Information about application

    • Author: @ezod & @xMasterX
    • Version: 1.3
    • Updated at: 2024-03-05
    • Downloads: 0

    Official Web Installer


GPS for Flipper Zero

A simple Flipper Zero application for NMEA 0183 serial GPS modules, such as the - Adafruit Ultimate GPS Breakout.

Heavy lifting (NMEA parsing) provided by minmea.


This is a single-screen app, and a few interactions are provided via the hardware buttons:

  • Long press the up button to change the baud rate. The default baud rate is 9600, but 19200, 38400, 57600, and 115200 baud are also supported.
  • Long press the right button to change speed units from knots to kilometers per hour.
  • Press the OK button to set the backlight to always on mode. Press it again to disable.
  • Long press the back button to exit the app.

Hardware Setup

Connect the GPS module to power and the USART using GPIO pins 9 (3.3V), 11 (GND), 13 (TX), and 14 (RX), as appropriate.

See the tutorial video - https://www.youtube.com/watch?v=5vSGFzEBp-k from Lab401 by RocketGod - https://github.com/RocketGod-git for a visual guide to the hardware setup.

Confirmed Compatible Modules

  • Adafruit Ultimate GPS Breakout
  • ATGM336H
  • Beitian BN-180
  • Beitian BN-220
  • Beitian BN-280
  • Beitian BN-880
  • Beitian BK-250
  • Beitian BK-357
  • Beitian BK-880Q
  • Beitian BE-280
  • Beitian BN-280ZF
  • Beitian BN-357ZF
  • Royaltek RBT-2100LP
  • u-blox NEO-6M
  • u-blox NEO-7M
  • Uputronics u-blox MAX-M8C Pico

If you have verified this application working with a module not listed here, please submit a PR adding it to the list.

Original repo link - https://github.com/ezod/flipperzero-gps Adafruit Ultimate GPS Breakout: https://www.adafruit.com/product/746 minmea: https://github.com/kosma/minmea u-blox NEO-6M: https://www.u-blox.com/en/product/neo-6-series


v1.0 - Initial release, v1.1 - Various important fixes, v1.2 - Fixes for latest API